ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Blog


Various models of flexible rubber tubes, compatible to all gases
 On the GNALI BOCIA’s catalogue, we can fine the flexible rubber tubes range to be used for connecting utilities to a domestic distribution network or to fuel tanks, in the case of portable appliances. The flexible rubber tubes are manufactured with materials compatible with the gases that [...]
09/07/2015

Mini control units; UNI 7131 guidelines
For the connection of various LGP tanks destined to the fuelling of a utility implant, the UNI 7131 suggests the use of devices such as the mini control units equipped with two or three stopcocks, which allow to switch cisterns without the dispersion of gas into the environment. The document [...]
02/07/2015

Eliminating dissolved gases' bubbles with air vent valves
Once again, we return to the topic of air vent valves; a valid help to eliminate the gases dissolved in the fluid that transports heat in our implants. Studies tell us that if, at the absolute pressure of 1 bar, we increase temperature from 20 °C to 80 °C , the maximum number of litres of [...]
25/06/2015

The stress corrosion cracking (SCC) and threaded brass fittings
Applying metallurgic knowledge to the threaded brass fittings teaches us how the alloys used in the creation of these products, if not treated correctly during all phases of manufacturing and even of installation, could suffer from a phenomenon known as Stress Corrosion Cracking (SCC). GNALI [...]
18/06/2015

The versatility of GNALI BOCIA's water manifolds
Beginning with the pressing of semi-finished product of considerable dimensions, derived from CW617N brass, begins GNALI BOCIA’s production chain for water manifolds. The subsequent processes are carried out in the Lumezzane facilities, by the use of latest-generation CNC (Computer Numerical [...]
11/06/2015

Advices for a good utilization of tubular electric heaters
Tubular electric heaters are usually resorted to inside open or pressurized water boilers or heaters, in order to get the fluid, normally water, to heat. For the sake of a better operation, their assembly should be done in a vertical position, but, especially, always submerged by the fluid to [...]
04/06/2015

Construction characteristics of pressure stabilizers
In the areas where the supply pressure coming from the network is not constant, a family of necessary accessories for the power supply of a plant is that of pressure stabilizers, which we might find in the catalogue of the GNALI BOCIA company. Their construction allows one to absorb even the [...]
28/05/2015

Taps for gas validated in accordance with the T-PED
The section in the GNALI BOCIA catalogue pertaining to taps for gas is one of the broadest ones dedicated to company production. In it we find in fact a number of different models which might be adapted to the different needs of the clientele. Some models of taps for gas are utilized for [...]
21/05/2015

Anti-sticking junctions for the safety valve
The pressure limitation on those plants where elevated temperatures might be reached is of fundamental importance for safeguarding the integrity of both the persons and the plant itself. To that end, a safety valve enabling the excess pressure to be discharged is usually inserted at a point that [...]
14/05/2015

FL289 the series of hoses for water
The FL289 series of products comprises all the available measures as regards hoses for water. Realized in stainless steel, they can be extended up to double their initial length, in order to be adapted to any installation situation. The threads on the ends, one male and the other female, are [...]
07/05/2015

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.