ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Blog


Air vent valves: an excellent thermodynamic solution
Heating systems or, more generally, systems that exchange heat with the environment via the circulation of fluids with a high convective heat transfer coefficient, are subject to the presence of quantities of air inside them. Air is a compressible fluid with a low coefficient of convective heat [...]
29/01/2014

The main problems concerning pressure regulators
When considering pressure regulators, it is often thought that downstream of the component there are no risks deriving from any malfunctioning of the component itself. However, this is not completely true. In fact, the components designed by Gnali Bocia are guaranteed over time and in specific [...]
22/01/2014

The characteristics of stainless steel hoses
With regard to stainless steel, the world of metallurgy has separated this type of steel into several classes based on the alloy elements and the microstructure. The stainless steel hoses produced by Gnali Bocia are marked ‘GNALIFLEX’. They are made from AISI 316 stainless steel: this is an [...]
15/01/2014

Gnali Bocia Hydraulic fittings are exported worldwide
The quality of the Gnali Bocia product range is the result of careful and close supervision activity that starts as early as the hydraulic fitting design phase. The Gnali Bocia Research & Development Department is a team of experts that constantly apply the know-how acquired over the years so as [...]
08/01/2014

The relief system in gas safety valves
The gas management systems are designed to maximise the efficiency of the plant in normal operating conditions or when at a standstill: it is always best to work at constant operating conditions as much as possible and this can be guaranteed by components such as gas safety valves. There are two [...]
01/01/2014

I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.