may 2019
april 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011


Limiting corrosion in tubular electrical heating systems
Realized with high purity copper pipes, tubular electrical heating systems spend most of their time dipped in water, constantly warming up and cooling down, controlled by a thermostat, capable of being fitted directly on them, which we are able to find in the GNALI BOCIA catalogue. On coming [...]

Two categories of brass pipe fittings
At its Lumezzane plants, GNALI BOCIA produces, through last generation systems, a complete range of pipe fittings realized in brass, both of generic and of multi-layer type, an important segment of the market.
Inside these sections, we find pipe fittings in the most common forms, such as [...]

Materials and labelling of methane gas pipes
The national scenario of methane gas pipes is regulated by the reference UNI CIG 7140 standard, which lays down the guidelines for the marketing of non-rigid pipes, in order to connect low power devices to the domestic gas distribution network. What is meant by low power is kitchens and other [...]

In the event of an emergency, the shut-off valve comes into operation
The shut-off valve is the ultimate device that allows the flow of fuel to the user to be interrupted upon the occurrence of conditions endangering the safety of the installation. One of these condition is when the limits of the operating temperature are transcended. This parameter is [...]

Manifolds for sanitary installations with locking screw
The range available on the GNALI BOCIA catalogues include the series of manifolds for sanitary installations equipped with a shut-off valve located on each output. The presence of this device makes it possible to lock every single user with a view to facilitating possible maintenance [...]

Recapitulation of the characteristics of air bleed valves
Let us run through the properties of the air bleed valves available on the catalogues of the GNALI BOCIA company. Produced from the starting premise of a brass body, their use targets the elimination of gases dissolved into the fluid of installations, which gather in heaters or in the highest [...]

Flexible water tubes made of stainless steel
Flexible tubes for water can certainly be found among our particularly important articles. Made of corrugated stainless steel, they connect devices to the water or heating systems. One of their uses, for example, is to connect the boiler to the domestic water and heating system. The material [...]

Using safety valves equipped with thermocouple
Until now we have always spoken of safety valves referring to heating systems, in other words the device that makes it possible to discharge the excess pressure when the heat generator goes out of control, protecting the integrity of the system itself. There is also another type of safety [...]

We order hobs with gas taps
The range of products made by the GNALI BOCIA factory in Lumezzane is completed by a set of gas taps that are suitable for being fitted on modern kitchen hobs. Unrefined material forged with brass is processed by cutting-edge numeric control machine tools to obtain gas taps, the closing [...]

Pressure reducers as protection for the installation.
We often come across, along the roads, construction yards busy repairing aqueduct conducts damaged by the pressure of water, which is introduced in order to compensate, on the one hand, the increased number of users, and on the other hand the existing losses. At that point, pressure reducers are [...]

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.