december 2019
november 2019
october 2019
august 2019
july 2019
june 2019
may 2019
april 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011


Electrical resistances for heating water
The electrical resistances for heating are useful in all those occasions when it is not possible to heat water or fluids through the use of a flame for safety or security reasons, or simply the presence of a fuel distribution network. Their purpose is to bring the fluid to a useful temperature [...]

Industrial pressure regulators for gas
The range of pressure regulators FG100 and FGB100 is used in applications that require very high flow rates, such as in the industrial or commercial sector that require at the same time a very high response speed. This is allowed by the way in which these pressure regulators are designed and [...]

Hydraulic fittings in brass
The hydraulic fittings are just one of the leading products that are manufactured at Lumezzane in the establishments of GNALI BOCIA, starting from hot-pressed brass blanks and subsequently machined on CNC transfer machines of the latest generation. Hydraulic fittings are complementary products [...]

Mini power packs with one or two stage reducers
The mini power packs produced by GNALI BOCIA serve for coupling at any moment two or more cylinders of gas , usually LPG, for powering devices such as cookers, refrigerators, boilers or hot water kettles, exploiting their compactness. In fact one of the sectors where mini power packs are used is [...]

Use the manifolds for heating for better distribution
One of the advantages that derive from the use of manifolds for heating is surely due to the fact that the pressure drop on the various ramifications are reduced compared to other types of installation, but also the heat distribution in the system is much more uniform and consequently the yield [...]

Safety valve and assembly onto the water heater
The safety valve is an essential component to ensure the safety of persons and installations, when the latter are heated at high temperature through water heaters and boilers that might give rise to such elevated pressure values as to cause their explosion. To avoid this, the dedicated section [...]

Tricks to install water hoses
When installing kitchens and boilers, the connection of the device to the plumbing and heating distribution system may only be done with water hoses, made of stainless steel and corrugated to enable their extension up to the desired size, or to make them go through a complex path. Installing [...]

anaerobic sealant for the tightness of threaded brass fittings
The tightness of threaded brass fittings occurs through a conical coupling on the thread, though we must bear in mind that the metal-on-metal coupling is not always enough to seal both liquids and gases. As hinted above, there are methods by now consolidated to seal these threaded brass [...]

Brass manifolds are beneficial for so many reasons
The benefits of brass manifolds may be summed up as follows: a wider wheelbase between junctions, while increasing obstructions, markedly facilitates assembly, to be combined with the use of soft pipes, such as copper or multi-layer pipe. Using brass manifolds decreases the installation costs [...]

Pure copper electric resistances
With power that reaches 3000 W, the electric resistances produced completely in GNALI BOCIA’s Lumezzane factory are versatile, multi-purpose items. The parts that make up the electric resistances are made from prime choice brass and copper that come from a certified supply branch, to give [...]

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.