march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011


Safety valves for the thermocouples in our catalogue.
In the GNALI BOCIA production catalogue that presents products for gas, there is a section completely dedicated to safety valves that should be applied to gas devices to prevent leaks if the pilot flame or the user’s main flame blows out. These safety valves should be combined with a [...]

Water pressure reducing valves to limit problems caused by high pressure
The water mains situation in Italy has never been optimal, but lately the idea of increasing the incoming pressure was proposed to eliminate the abundant leaks in the system, and to guarantee suitable pressure at each point of use. This has made it obligatory to introduce water pressure reducing [...]

Hydraulic fittings for the multilayer pipe
Next to the generic hydraulic fittings in the GNALI BOCIA catalogue, available in various versions, from the yellow brass type to the nickel-plated one, we also find a range of fittings suitable for assembling systems with multilayer pipes. This type of pipe, among the latest to be marketed, [...]

Metane gas pipe and slippage test
The production of devices complying with the UNI CIG 7140 standard, such as the methane gas pipe, should be backed up, besides a certified production management system, by a whole series of type tests, to be conducted during the initial stage in order to validate the process and periodically [...]

Gas cocks from the camping series
A section of the GNALI BOCIA catalogue is entirely devoted to the series of gas cocks called “camping”, i.e. with a threaded male input coupling measuring M16 x 1,5. This is what enables connection to the cylinders specifically designed for the sector. The vents, instead, differ depending on [...]

Thanks to brass manifolds, I have less pressure drops
When we plan the installation of a new bathroom, we can choose to use for distribution some brass manifolds, with their pro’s and con’s compared to a connection in series typical of installations carried out with galvanized pipe or a rigid one such as the PPR (Pipe Penetrating Radar) [...]

Brass fittings and their sealing
Manufactured in CW617N suited to be in contact with drinking water and with gases, in the GNALI BOCIA catalogues we find a wide range of brass fittings, suitable for any type of manufacture or installation. Threaded in accordance with the gas standard, they are extremely versatile.
For a tight [...]

Air vent valves and internal balance
What happens if in a system you do not install air vent valves? The main problems of gas accumulations inside pipes is the creation of bottlenecks, so that a capacity reduction becomes inevitable.
The way air vent valves work is utterly simple once we weight that by their usefulness. The heart [...]

Compensated pressure regulators to fit any situation
Equipped with a compensation system that stabilizes its operation, the pressure regulators for water available in the GNALI BOCIA catalogues enable a precise and consistent regulation of the output pressure even in the presence of far-reaching variations in input pressure. That makes of them [...]

Parts for tubular electrical heating systems
In the catalogue of items for water, we find not just tubular electrical heating systems, but also the separate parts for them. Given that brass processing is one of the strengths of the company, all turned and machined parts may be manufactured both for internal production and pursuant to [...]

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.