ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Blog


Safety valve for boiler approved in accordance with the PED directive
Approved in accordance with directive 97/23/CE, also known as PED, at certified agencies and calibrated at the counter in our factories, the safety valve for boiler is an indispensable component to protect the equipment from dangerous overpressure, an event that might occur in systems with hot [...]
22/09/2016

Pressure regulators for various types of fluid
How to solve the problem of excessively high pressure at the entry point of installations? By using components termed pressure regulators; essentially, any object capable of bringing an excessively high input pressure down to a fixed output value is defined as being one, although we might also [...]
15/09/2016

Manifolds for sanitary facilities: which model should I choose?
The manifolds for sanitary facilities we come across in the GNALI BOCIA catalogue may be made in different ways, but mainly speaking we should consider two construction types, the one with an adjustment valve on each output and the simple linear type.
With the former, we may use the faucet [...]
08/09/2016

Methane gas pipe in rolls complying with the UNI CIG 7140 standard
We have spoken in a previous post about the connection between the methane gas pipe and the UNI CIG 7140 standard that regulates characteristics and tests it must be subjected to. Our product, reinforced through a fabric layer and manufactured in PVC, a material particularly resistant to this [...]
01/09/2016

Mini power packs, the compact solution for connecting tanks
A compact solution for connecting more than one tank in order to feed the same system is that of mini power packs, one of the key products of the GNALI BOCIA company. These items, produced at our Lumezzane plants in different configurations, are capable of fulfilling a range of system [...]
25/08/2016

Use of air vent valves in solar panel systems
In the Gnali Bocia catalogue, we may find the section devoted to automatic air vent valves that suit multiple situations very well; oftentimes, however, they are also used in solar energy systems in order to extract from the primary circuit the air and gas formations that might block its [...]
18/08/2016

Galvanic covering for brass fittings
We have seen some of the technical aspects of brass fittings, especially those that relate to stress corrosion cracking, which depends on the material use and on the method of cooling down the material after the hot pressing processing. We have likewise seen the potential influence the sealing [...]
11/08/2016

Heating the swimming pool, too, with electrical resistance heater groups
During the summer period, many of you have the privilege of a nice swimming pool in the garden for enjoying the sun and a suntan. Not everybody, however, loves diving into a pool of water that is not exactly set at an optimal temperature, especially at the start of the season when the biting air [...]
04/08/2016

Safety valves for the thermocouples in our catalogue.
In the GNALI BOCIA production catalogue that presents products for gas, there is a section completely dedicated to safety valves that should be applied to gas devices to prevent leaks if the pilot flame or the user’s main flame blows out. These safety valves should be combined with a [...]
28/07/2016

Water pressure reducing valves to limit problems caused by high pressure
The water mains situation in Italy has never been optimal, but lately the idea of increasing the incoming pressure was proposed to eliminate the abundant leaks in the system, and to guarantee suitable pressure at each point of use. This has made it obligatory to introduce water pressure reducing [...]
21/07/2016

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.