october 2019
august 2019
july 2019
june 2019
may 2019
april 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011


Methane gas Pipe legislation
Safety in the home must always be of foremost importance, as should the safety of those living there. We should always bear this in mind when speaking about methane gas pipes. To this end, Uni issued the UNI-CIG 7140 standard through the Italian Gas Committee. Updated in 2013, this defines the [...]

Safety of Water manifolds
Water supply, whether for domestic water or for heating purposes, is greatly assisted by the use of water manifolds within the systems. This modular solution can be found in the GNALI BOCIA brochures. Here we find dezincification-resistant brass two to four-way water manifolds, which can be [...]

Tradition and innovation in thermal-hydraulic products
In Gnali Bocia's catalogue the installation technician or designer can find thermal-hydraulic products capable of satisfying every demand in the field of water and gas control. Safety, production quality improvement and client satisfaction are the values that our company always strives [...]

Gas taps, all under control
The Gnali Bocia catalogue include a wide range of gas taps that provide a solution for any application. Compliance with both Italian and EU standards make the products of this company a safe choice that guarantees durability, ease of installation and especially full safety of the environment [...]

Choose pressure regulators to fit your installation
In recent times, the pressure of aqueducts gets increased dramatically to reach the most disadvantaged consumers, creating problems for devices installed in buildings. In order to overcome these drawbacks, we can use pressure regulators to adjust output pressure values. Pressure compensated [...]

Air vent valves to eliminate gases from a system
The formation of air or gas bubbles is one of the factors that reduce a circuit's performance and thermal exchange and most importantly produce noise inside it; these bubbles can be eliminated through the use of air vent valves. The formation of gas in a system has several causes, among [...]

Stainless steel hoses synonymous with hardness and safety
When household systems need reliable and resistant connections, the items most adapted to satisfying this requirement are stainless steel hoses. The technology which is now a solid part of their production guarantees reliability and resistance over time. In AISI 316L solubilized material, this [...]

Tubular heating elements and copper corrosion
The company Gnali Bocia srl produces tubular heating elements that can be used in water heaters and boilers both open and pressurized. The range available in the catalogue covers a wide variety of needs with heating powers ranging from 1000 to 3000 watts, normally functioning with 220 Volt [...]

The purposes of gas safety valves
Gnali Bocia S.r.l. offers a wide range of products also including gas safety valves, which are undoubtedly useful in the construction of industrial and civil systems. These valves are manufactures in the Lumezzane production plants according to the most stringent machining and testing standards to [...]

Best production techniques for brass fittings.
The production of brass fittings usually begins by hot forging semi machined products. This stage of the production requires a series of precautions that will guarantee a long life cycle to the installed parts, without giving any dezincification and breakage problems. The cooling after the [...]

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.