august 2019
july 2019
june 2019
may 2019
april 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Pressure regulators for industrial uses

Adjust the inlet pressure through the FG and FGB ranges of pressure regulators

In the catalogue section dedicated to methane we find the range of FG and FGB series of pressure regulators designed and constructed for adjusting the pressure of methane gas or propane in civil and industrial applications.
With high accuracy they use the balancing technique in order to obtain a linear adjustment in the widest range of input pressures, and especially of flows. All this to support the professional when dealing with the distribution of gaseous fuels.
According to requirements, the entire range of pressure regulators can be provided with threaded, or with flanged connections that facilitate the operations of maintenance or replacement in case of failure.
Internally, the pressure regulators are fitted with a balanced spring system, made with stainless steel springs on a cast iron body; this guarantees their duration in time, although it is advisable to mount an aluminium filter upstream during their installation in order to intercept any impurities that may damage the system.
Pressure regulators in the FGB version are equipped with a block valve at origin, which can intervene both on maximum and minimum pressures. Designed specifically for plant safety, it works with a direct action and intervenes to protect the installation.
The technical customer service is available for installers in order to clarify any doubts of a technical nature and to help the customer in choosing the right component.



See also
19/12/2017 Industrial pressure regulators for gas High flow pressure regulators with compensated adjustment for greater precision

19/02/2019 Compensated pressure regulators for gas Range of pressure regulators for gas operating at high medium and low pressure with balanced compensation system

19/12/2014 Balanced pressure regulators for civil and industrial applications Balanced pressure regulators can be used for high flow values and quick changes

19/07/2014 Choose pressure regulators to fit your installation The range of pressure regulators in our catalog enables you to choose the most suitable model.

19/07/2015 Using water pressure regulators to save up The presence of water pressure regulators reduces the waste of the precious fluid in the heating passage

I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.