ARCHIVE
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
november 2019
october 2019
august 2019
july 2019
june 2019
may 2019
april 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

The use of water manifolds in heating installations

Water manifolds are used in homes for all heated water sorting installations

Water manifolds are essential components for floor heating installations of homes and offices and for systems that convey heated water in working environments of different types.
This is why Gnali Bocia designs and sells different types of water manifolds. The production caters for different types from the catalogue: manifolds that have from two up to four derivations per product, so as to channel the flow in arrival from the boiler or any other water heating installations down several ways. By doing this a number of different exits can be managed, thus allowing for a more versatile management of the flow that must be sent on to other heat storage systems or that has to flow through the flooring building.
Water manifolds are characterised by a manually operated manoeuvring valve that can be used to interrupt the water flow that runs inside, for example during periodic maintenance operations. The replacement of any pipes connected to the installation is thus made simple.
Water manifolds with female or male type ISO 228 couplings can also be requested.
The water manifolds are usually positioned inside the walls of the buildings and covered by a panel, so that in case of need interventions can be carried out without damaging plastered parts of buildings.
 

06/03/2013


See also
06/02/2014 The heating of a house is managed by a group of manifolds. Houses need a hydraulic management system which is controlled by heating manifolds

06/03/2018 Manifolds for sanitary installations and flexible choice of derivations The modularity of the manifolds for sanitary installations allows to expand the number of derivations if necessary

06/11/2018 Heating manifolds multiple derivation Combining heating manifolds together to obtain the right number of derivations



06/12/2017 Use the manifolds for heating for better distribution With the manifolds for heating there is a better distribution and balancing of the heat in the system

06/01/2017 Heating manifolds, low bulk Heating manifolds made using modern and efficient machines in the Lumezzane headquarters


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.