august 2019
july 2019
june 2019
may 2019
april 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

The heating of a house is managed by a group of manifolds.

Houses need a hydraulic management system which is controlled by heating manifolds

Heating manifolds manage the hydraulic heating system of a house. These systems require many properties: they must not take up much space and particularly not impose on the inside of the house; they must have passed all the certifying tests and should be sold with the instructions manual containing the specific calibration procedures for the type of system that is being installed. Only one heating manifold is installed on each floor of the house that requires heating: a compartment is placed inside a wall and houses all the supports and piping which are linked to the heating manifolds. The metal box that will monitor the heating manifolds will then be painted on the outside in the same colour as the wall, blending in as much as possible.
The Gnali Bocia catalogue includes a range of heating manifolds with ports that vary in number from one to a maximum of four: this allows a greater division of the flow in the event that a very large area needs to be covered. Moreover, the internal surfaces all have a very high finish in order to reduce the coefficient of friction, thus reducing pressure losses in the pipes.
Through the catalogue you can also request both heating manifolds with couplings complying with the standard ISO 228 with a nickel-plate finish, and in-line heating manifolds without knobs


See also
12/08/2018 Heating manifolds with passage of 1 Heating manifolds necessary for easy installation of a heat distribution system

12/03/2013 The use of water manifolds in heating installations Water manifolds are used in homes for all heated water sorting installations

12/01/2017 Heating manifolds, low bulk Heating manifolds made using modern and efficient machines in the Lumezzane headquarters

12/11/2018 Heating manifolds multiple derivation Combining heating manifolds together to obtain the right number of derivations

12/12/2017 Use the manifolds for heating for better distribution With the manifolds for heating there is a better distribution and balancing of the heat in the system

I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.