ARCHIVE
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

The range of threaded gas fittings

General gas fittings to create threaded connections with metal pipes outside the masonry

The company produces both gas fittings and for water starting from selected raw materials coming from the national market that guarantee the physical and mechanical characteristics that are necessary for a correct resistance when the material comes into contact with the gas.
In order to guarantee the mechanical seal and above all the tightness of the gas fittings, the processing starts from a hot forging of the material which is to homogenize and compact the material, which is not achievable for instance with the micro-casting process. This phase is needed to remove micro-fractures that could cause the gas to escape and make the environment explosive.
It is also for this reason that the gas fittings cannot be installed underneath, in fact the legislation allows only the installation on sight. This is one of the reasons why there is a range of chrome fittings, to have aesthetic value, but also and above all to improve resistance to atmospheric agents.
For any information or custom quote please contact us without any obligation.

02/08/2018


See also
02/07/2018 Brass fittings for water CW 617 N Fittings for water made in business establishments of Lumezzane with numerically controlled technology

02/03/2013 Hydraulic fittings and their usage in various sectors of interest Through the hydraulic fittings water flow is transported from one zone to another, thus reaching the required supply point

02/11/2017 anaerobic sealant for the tightness of threaded brass fittings For the tightness of threaded brass fittings, we can use special sealants as well as classic methods like teflon and hemp.

02/06/2016 Brass fittings and their sealing In order to seal joints with brass fittings, it is necessary to choose the right sealing material that is compatible with the system fluid.

02/02/2015 Key features of brass threaded fittings The threads and above all the parameters for the use of brass threaded fittings


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.