june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
november 2019
october 2019
august 2019
july 2019
june 2019
may 2019
april 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Compensated pressure regulators for gas

Range of pressure regulators for gas operating at high medium and low pressure with balanced compensation system

A range of articles that has an added value, even if not well known, is that of balanced pressure regulators suitable for large flow rates for use in high, medium or low pressure systems. Their use is particularly useful in civil and industrial environments to reduce the pressure of methane gas or LPG. 
A quality that they have is the speed in the adjustment response and therefore these pressure regulators are particularly indicated in applications such as: ovens, boilers, burners.
As for the homonymous component for the water, this type of device has a membrane control system counterbalanced by a compensation spring and a balancing system that makes adjustment precise.
The construction of these pressure regulators is compact and allows its installation even in environments where space is limited. Despite this, the design complies with EN 334 and EN 14382, which are the two industry reference standards.
For a better safety all the pressure regulators are equipped with an overflow valve and if required they can be equipped with a blocking valve.


See also
07/12/2017 Industrial pressure regulators for gas High flow pressure regulators with compensated adjustment for greater precision

07/02/2015 Pressure regulators for industrial uses Adjust the inlet pressure through the FG and FGB ranges of pressure regulators

07/06/2016 Compensated pressure regulators to fit any situation Pressure regulators have the shutter (spear valve) that helps the adjusting spring by creating a significant load loss.

07/12/2014 Balanced pressure regulators for civil and industrial applications Balanced pressure regulators can be used for high flow values and quick changes

07/09/2016 Pressure regulators for various types of fluid Putting pressure regulators at the entry point of an installation in order to safeguard the connected devices

I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.