ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Linking more gas tanks with the tubular units

To be installed outside the buildings, tubular units enable the simultaneous connection of more than one tank

You have no problems of space? If so, in order to link more than one tank to your gas distribution plant you can use tubular units, which enable the simultaneous installation of up to 4 tanks on the same line. Every tank has its stopcock that is needed for insulation and for replacing the depleted ones.
Realized in brass tubular, tubular units are equipped with a fitting unit on which it is possible to build a pressure-reducing regulator, supplied as an optional part by our depot. The combination of this tool with a manometer and a safety valve make of tubular units a high safety device.
We should not forget, however, that safety is not ensured by a single factor; the law stipulates that the gas tanks, which I have to link to the tubular units, should be lodged outside the buildings in order to limit the damages caused by possible losses, and should be protected by a construction shielding them from bouts of bad weather and strikes. The construction deployed as protection of the unit must be sealed by a security door boasting an adequate ventilation with a view to averting dangerous gas concentrations.
 

05/11/2015


See also
05/08/2017 Mini-power units for campers and mobile homes Mini-power units not only for campers but for all those applications where space is vital

05/07/2015 Mini control units; UNI 7131 guidelines The UNI 7131 regulation provides guidelines for the installation and usage of the mini control units for the fuelling of implants with LPG tanks

05/04/2015 Use of the mini power packs in outdoor demonstrations The UNI/TR 11426 technical regulation defines the rules on utilization of mini power packs as well in temporary installations.

05/07/2021 Mini-control units: the UNI-7131 standard What does the UNI-7131 standard say regarding the mini control units, an essential connection for gas?

05/08/2014 The use of mini control units on your camper. One of the applications of mini control units is mounting it on your motorhome or caravan in order to guarantee a safe holiday.


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.