ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Safety guaranteed by Gnali Bocia gas taps

Gas flows inside these taps so maximum safety must be guaranteed in order to prevent dangerous accidents.

Strict standards are in place to ensure safety to all people close to possible dangerous sources such as LPG, methane and other gases. The standards must guarantee that the prevention and protection measures are sufficient to avoid any accident by drastically lowering the risk threshold. In terms of standards, Gnali Bocia, always first in line for safety protection, adopts and complies with several national and international standards that allow to certify the high quality of their products, such as gas taps.
Gases such as LPG are maintained at pressure values greater than ambient pressure so that they assume a liquid form, taking up less room than the same gas in gaseous form. This leads to the use of containment structures that are able to support the pressure of liquid gases. For this reason, the gas taps must have a very high tensile strength and their capacity to sustain abnormal temperatures should be guaranteed.
The gas taps are designed at Gnali Bocia’s Research & Development Department where the specialists control and check carefully every step of the technological processes for the production of gas taps.
In conclusion, the combination of a careful design process as well as a precise definition of the standards and their accurate application ensure adequate protection for those who work with this technology.
 

18/12/2013


See also
18/03/2014 Laws and standards for safety valves Respecting the legal requirements for safety valve is essential in order to ensure safety of operators and protect the environment.

18/09/2013 Many lpg systems use gastaps It is necessary to have systems that use adequate lpg gastaps tp control the fuel load.

18/01/2013 The various types of taps for gas produced The designing, testing and sale of Gnali Bocia gas taps

18/01/2014 Gnali Bocia Hydraulic fittings are exported worldwide The hydraulic fittings are sold all over the world and Gnali Bocia manages the entire sales process, guaranteeing maximum quality and respect of standards and regulations

18/07/2014 Gas taps, all under control Gnali Bocia's gas taps help you to resolve any planning and installing problems


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.