january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Gas taps with pin or conical closure

The sealing of the gas taps is ensured by the conical seal made of metal on metal that makes it durable and reliable

In the construction of the gas taps, the locking system used most frequently is the pin system or in some cases with a conical seal. This is because the safety of the tapered metal-on-metal seal is still the best available. The opening and closing control is entrusted to a micrometric screw which gives the possibility to control the flow of gas in a precise manner. This type of closure also bears the highest pressures without the risk of seal degradation.
This system generates a capillary passage in the gas taps which results in a pressure drop that controls the flow rate. Their use is to regulate the power supplied by pressurized tanks, such as cylinders or tanks towards the devices used.
In the conical version the gas taps are usually used in the management of kitchen stoves, and in this case they also have a system, which is a typical feature of this sector, which allows to adjust the minimum flow rate of the tap.
There are a large number of versions and models of gas taps that meet all the needs, both in the sector and in the country, with a wide variety of inputs and outputs even with a universal hose holder.


See also
24/11/2018 Gas taps with pin or conical closure To regulate the flow in gas taps with pin closure is also possible at high fuel pressures

24/07/2014 Gas taps, all under control Gnali Bocia's gas taps help you to resolve any planning and installing problems

24/01/2015 Choose gas taps from our catalogue You can find various models of gas taps for every need in the GNALI BOCIA Catalogue

24/01/2020 A variety of gas valves Gas valves include a wide range of equipment for volatile fluids

24/04/2016 Taps for gas in the spiked version for the sake of flame adjustment All the different taps for gas available in the rich catalogue of the GNALI BOCIA company.

I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.