ARCHIVE
september 2021
august 2021
july 2021
june 2021
may 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
november 2019
october 2019
august 2019
june 2019
may 2019
april 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Power packs to facilitate the change of tanks

If you equip power packs with a manometer, they may provide us an indication of the tank level.

Do you need to avoid being without gas at home or while in motion on your trailer or camper? Would you like an easy way of replacing your tanks without dangerous losses and without interrupting the cooking of your dinner? The best method is to use one of the power packs produced in GNALI BOCIA’s Lumezzane plants.
Two or three connections facilitate the versatility of power packs, each one equipped with a shut-off valve, easy to switch on and off, in order to choose the most suitable tank to be used at that moment. Let us remember that the UNI 7131 standard states that it is not possible to leave a connection free, without a tank attached, for the sake of ensuring security.
At the output point of power packs, we may find a pressure reducer for the purpose of adapting the gas flow to the various users, which might be: boilers, stoves, or some other user devices. In order, moreover, to better highlight the state of capacity of the tank, we may also get a version fitted with a manometer.
The power packs that are produced and sold may be fixed onto a support wall or through a flanging fitted with holes, entirely derived in the brass body or through an iron bracket.
 

03/12/2015


See also
03/05/2016 Mini power packs realized in brass and used to connect more than one tank. Mini power packs with two or three shunts to which more than one tank may be connected, equipped with a pressure reducer.

03/08/2016 Mini power packs, the compact solution for connecting tanks Mini power packs equipped with pressure gauge and unidirectional valve for an easier replacement of tanks

03/03/2018 Mini power-packs fundamental components for a compact system Use of mini power-packs saves space without compromising safety

03/10/2018 Fixing of mini-power packs for safety Mini-power packs equipped with bracket obtained in the unit or refitted in steel for a correct fastening

03/04/2015 Use of the mini power packs in outdoor demonstrations The UNI/TR 11426 technical regulation defines the rules on utilization of mini power packs as well in temporary installations.


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.