ARCHIVE
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

High automation for installing the safety valves

Modern systems for the assembly of safety valves in the Lumezzane plants.

When we talk about safety valves we must distinguish between two large families, the one destined to the safety of gas burners and the one for the prevention of overpressure in the systems in which they are present or a boiler or an electric boiler. These are products that have been developed and manufactured in brass thanks to our many years of experience.
In particular, the safety valves for boilers are devices that do not block the flow, but discharge excess pressure preventing dangerous explosions in the plants. This is thanks to a spring system which, if the safety pressure is exceeded, open, allowing excess water to escape to rebalance the system.
These safety valves are assembled on highly automated systems that allow to obtain a perfect product in all its functions, but also to test each piece before final packaging. This allows us to ensure the customer always functional safety valves and to meet the requirements that the law requires on quality control. Documentation on PED certification can also be provided on request.
 

27/12/2018


See also
27/05/2017 Boiler safety valves do not always leak because they are faulty There are other, more important things that can cause a boiler safety valve to drip without blaming the product

27/09/2016 Safety valve for boiler approved in accordance with the PED directive Safety valve for boiler made in brass on numerical control machines at the Lumezzane plants

27/02/2016 Using safety valves equipped with thermocouple Safety valves for intercepting gas if the flame dies.

27/04/2013 Safety provisions of the valves offered by Gnali Bocia Safety valves are designed to work on contact with hot water accumulation systems for sanitary installations

27/07/2015 The safety valves designed and produced according to PED guidelines Structures protected from overpressures through the use of safety valves, manufactured by GNALI BOCIA


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.